Maintenance - T.I.P. Cross Tools CKS 1200 V Traducción De Las Instrucciones De Uso Originales

Cutting the limbs of fallen tree
WARNING: Be alert to the springing back of a cut limb
Pruning of standing tree
WARNING:
• Do not work standing on unstable bases or rung ladders.
• Do not over reach.
• Do not cut above shoulder height.
• Always use both your hands to hold the saw.

9. Maintenance

Maintenance and checking list
Maintenance work
Chain brake
Chain wheel
Guide bar
Saw chain tension
Saw chain
Throttle trigger /
throttle lock-out switch /
ON/OFF switch
Cranking rope /
return spring
Chain lubrication
Oil tank
Fuel and oil tank caps
Fuel tank
40
First check to which side the limb is bent. Then make
the initial cut from the bent side and finish by sawing
from the opposite side.
Cut up from the bottom, finish down from the top.
each use
Functional test
Functional test
Servicing
Check
Have it replaced
Check
Clean / turn round
Replace
Check
Check
Have it sharpened
Replace
Functional test
Have it replaced
Functional test
Replace
Check
Clean
Check
Replace
Clean
Translation of original operating instructions
Operating hours
Before After
each use
10
X
X
X
X
X
X
X
X
X
X
16
If required/
yearly
damaged
20 100
X
X
X
X
X
X
X
X
X
X
For de-
commis-
sioning
X
X
X
X