Preparing The Appliance - Lavorwash FIT 35B Instrucciones Para El Uso

8. Take the power cable plug (6) out of the socket (7) on the battery.
9. Insert the cap (5) that covers the battery power socket.

18 PREPARING THE APPLIANCE

1. Take the package to the dedicated maintenance area.
2. Remove the appliance and all the accessories from the box.
3. Insert the lower tube (1) of the control handlebar in the hole on the joint (2) (Flg.1).
4. Fix the handlebar to the joint using the screw and nut (3),making sure the hole on the handlebar
coincides with the hole on the joint (Fig.2).
Block the handlebar in the horizontal position . Rest your foot on the main part of the appliance
to prevent it from tilting, then push the handle away from you until it snaps into the horizontal
Position (Fig.3).
ATTENTION: do not rest your foot on the main switch
EN
42