2 Safety Precautions and Working Techniques
– Resharpen the brush knife regularly and
whenever it has dulled noticeably, and have it
balanced if necessary (STIHL recommends a
STIHL servicing dealer).
2.19
Circular Saw Blade
Suitable for cutting shrubs and trees with a maxi‐
mum stem diameter of 4 cm.
Before starting the cut, accelerate the engine up
to full throttle. Perform cut with uniform pressure.
Use circular saw blades only with a matching
limit stop of the correct diameter.
WARNING
To reduce the risk of blade damage, avoid con‐
tact with stones and the ground. Resharpen the
blade properly in good time – dull teeth may
result in the blade cracking and shattering and
causing serious injury.
When felling, maintain a distance of at least two
tree lengths from the next felling site.
0458-393-8721-C
2.19.1
Risk of kickout
The risk of kickout is highest in the black area of
the blade: Do not use this area of the circular
saw blade for cutting.
There is also a risk of kickout when using the
lighter shaded areas of the blade: These areas
of the blade should only be used by experienced
operators with specialized training.
STIHL recommends that you use the non-sha‐
ded area of the circular saw blade. Always start
the cut with this area of the blade.
English
59