Safety Instructions - cinetto PS40.1 Instrucciones De Ensamblaje

SAFETY INSTRUCTIONS

Safety guidelines of "B-MOVED" system
Intended use
"B-Moved" control system by Cinetto is exclusively intended to move sliding doors for wardrobes or for walk-in closets. The maximum
weight limit of each door, unless otherwise noted, is specifi ed on the technical datasheet of each compatible sliding system by Cinetto.
The system must be positioned at an inaccessible height for the user during the normal use.
System restrictions
"B-Moved" system cannot be used with products out of the ones allowed by the producer.
In any case the producer is not responsible for improper installation and use.
The system must be used only with the control unit supplied by the producer.
The system must be used only with the power unit supplied with the control unit.
The transmission system must be positioned at an inaccessible height for the user during the normal use, keep the minimum safety high of 2.5 mt.
Stowing or placing or mounting any kind of material on the top of the furniture, except for the sliding system and B-MOVED system itself, is strictly
forbidden.
Failure to respect this indication can irreversibly damage the system and determine a dangerous condition for the user.
Use environment of the system
B-Moved system is designed, realized and tested for domestic use, in accordance with DIN 60335. The system is realized with all the safety
equipment in accordance with DIN 60335. Keep the system at a use temperature compatible with domestic environment, free from interfering
material and protected against impact.
Risk evaluation activity during the project design
During "B-Moved" design activity have been evaluated severe and low risks.
To ensure the user's safety have been applied preventive actions.
Due to this, following the use and installation instructions is mandatory.
The following risks have been evaluated: shear and collision risk; environmental agents' alteration and impact
during transport; alteration after impact during installation and maintenance; unintentional emission, transmission
and reception of electromagnetic signals; electric shock risk; wear risk; overheating and fi re risk; malfunctioning
after wrong installation risk.
Risk of injury caused by automated door movement
Despite the risk of crushing and shearing, injuries are prevented, during normal operation, by the optimization of parameters based on
the safety and functionality of the system. There are indirect variables that can compromise the smooth operation of the hardware and
the software, as examined in case of failure of electronic components. In order to bring the risk caused by the automatic handling of the
doors to an acceptable level, the system was designed by combining electromechanical components capable of exerting, when out of control, a
maximum force of 200N measured in the operating range of the end user. This value was considered acceptable because it does not represent
a real risk of injury to people or pets.
The system put out of control can generate that force just in the case, considered rare, in which failure occurs during the motion of a door and
only until it reaches the mechanical stop. After the fault, the system blocks and goes out of service.
Limitation of liability
Using and operating "B-Moved" in accordance with the technical datasheet of each compatible sliding system is mandatory.
Any variation, manipulation, change of environment of use or improper application exclude Cinetto F.lli s.r.l. from any liability for direct or
indirect damage.
"B-Moved" installation instructions
Following the Installation instructions of each B-MOVED compatible sliding system is mandatory, to ensure the right functioning and
prevent wrong installation.
Control unit restrictions
The control and adjustement of the motion trasmission must be operated only by the supplied control units. Other uses of the mechanical
and electrical parts can generate electric and mechanical severe risks.
Use warning
Before any operation out of normal use on "B-Moved" system unplug the power unit of the system from any electricity source.
The power unit of the system must be unplugged during installation, cleaning, inspection and disassembly as well. Do not insert fi ngers
in proximity of the transmission bar, and/or in any opening of the system in general. In case of on-site application protect the system from
dust, shavings or any other element could damage the system. Keep away any kind of liquid from the system.
Use restricitons
This appliance can be used by children aged from 8 years and above and persons with reducved physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
The system is designed according to the most recent legislative safety references. The related certifi cates are available upon request.
Frequency of use
B-Moved system is designed, realized and tested for domestic use, for this use have been evaluated an average daily frequency of 10
opening and closing cycles per door.
60