Continuity Check - Beta 1760S Manual De Instrucciones

True RMS Digital Multimeter

6.6. Continuity Check

WARNING: To avoid electric shock, never measure continuity on circuits or wires
that have voltage on them.
1. Set the function switch to the
2. Insert the black test lead banana plug into the negative COM Input Jack; Insert the
red test lead banana plug into the Positive Input Jack.
3. Press the Mode/Rel Button to view "
4. Touch the test probe tips to the circuit or wire you wish to check.
5. If the resistance is less than approximately 50Ω, the audible signal will sound; If the
circuit is open, the display will indicate "OL".
18
Position.
" and "Ω" on the display