Denver Electronics TCU-209 Manual De Instrucciones página 11

example: Album # 3, Track # 2.
4. To check the program you have stored after complete programming,
press the PROGRAM BUTTON once during the CD Stop mode. The LCD
DISPLAY will show "
BUTTON to read the Album number, then press the CD SKIP/SEARCH
FORWARD or BACKWARD BUTTON to read the specific track number of
said Album. Press the PROGRAM BUTTON again, LCD DISPLAY will show
" " and blink continuously. Repeat above procedure to check all
programs being stored.
5. To cancel the programmed memory:
During the CD stop mode, press the CD STOP BUTTON once.
OR
Open the CD Door during the CD stop mode.
The "PROGRAM" Indicator will disappear from the LCD DISPLAY.
Recording from CD Player
1. Slide the FUNCTION SWITCH to "CD" position.
2. Put a CD into the CD compartment with the label side upward.
3. Insert a cassette into the cassette compartment and press PAUSE
BUTTON of the cassette deck.
4. Press RECORD BUTTON and PLAY BUTTON simultaneously for recording
stand-by. With the built-in ALC, the best recording quality is adjusted
automatically.
5. Activate the CD player, playing in a desired track as described in the
COMPACT DISC PLAYER OPERATION section. Release the PAUSE
BUTTON of the cassette deck to start recording.
6. To stop recording temporarily, press the PAUSE BUTTON. To continue
recording, press the PAUSE BUTTON again.
7. Press STOP/EJECT BUTTON of the cassette deck to stop recording. Then
stop CD playback by pressing the CD STOP BUTTON of the CD player.
" and blink continuously. Press the FOLDER
English - 10