Cascade TF40-18 Manual De Instrucciones página 4

OPERATION
CONTROL PANEL
MODE EXPLANATION
Standard Wind
The Standard Wind mode is simply the
ECON, LOW, MED, HIGH speed settings
Evening Wind
The air f ows as an evening breeze to a
light night breeze and are detailed as
follows:
ECON Evening Wind
ECON
The air f ow remains at ECON
ECON
LOW Evening Wind
The air f ow begins at LOW,
after half an hour it will drop
LOW
down to ECON
MED Evening Wind
The air f ow begins at MED,
after half an hour it will drop
MED
down to LOW, after an
additional half an hour it will
drop down to ECON
HIGH Evening Wind
The air f ow begins at HIGH,
after half an hour it will drop
HIGH
down to MED, after an
additional half an hour it will
drop down to LOW, after an
additional half an hour it will
drop down to ECON
6
POWER
OSCILLATION
MODE
WIND SELECTION Allows for three
TIMER
Time increases by 1 hour with each
push of the button. The LED
indicators are cumulative to a
maximum of 15 hours.
SPEED SELECTION
MED
ECON LOW
Breeze Wind
Automatically selects wind speed
randomly as you would fi d outdoors.
The speeds are detailed as follows:
ECON Breeze Wind
The wind settings will f uctuate
ECON
between MED, LOW and ECON
ECON
in an 80 second wind cycle
that repeats with ECON being
the most common
LOW Breeze Wind
The wind settings will f uctuate
between MED, LOW and ECON
LOW
in an 80 second wind cycle
that repeats with LOW being
the most common
MED Breeze Wind
The wind settings will f uctuate
between HIGH, MED, LOW and
MED
ECON in an 80 second wind
cycle that repeats with MED
being the most common
HIGH Breeze Wind
The wind settings will f uctuate
between HIGH, MED, LOW and
HIGH
ECON in an 80 second wind
cycle that repeats with HIGH
being the most common
■ WARNING: To reduce the risk of electric
shock, DO NOT use this fan with any
solid-state speed control and DO NOT
insert finger or ny object into grill.
USER SERVICING INSTRUCTIONS
A. To disconnect, grasp the plug and pull it from the wall outlet. DO NOT unplug by pulling the cord.
B. Open fuse cover. Slide open the fuse access cover located on the top of the plug towards to plug
blades.
C. Remove the fuse by turning the fuse over (end over end) carefully making sure not to break the
fuse. (See Fig. 2)
D. Risk of fire. Replace fuse only with 5A, 125V fuse.(Provided with product)
E. Close fuse cover. Slide close the fuse access cover toward the fan cord on the top of the plug.
Fig. 1
HIGH
NOTICE:
1. When you replace the fuse, DO NOT force the slide suddenly or overexert to reduce the
risk of damage.
2.
3. Risk of f re. Do not replace attachment plug. Contains a safety device (fuse) that should
not be removed. Discard product if the attachment plug is damaged.
4. WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any
Solid-State Speed Control Device.
5. This product employs overload protection (fuse). A blown fuse indicates an overload or
short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the
fuse as per the user servicing instructions (follow product marking for proper fuse rating)
and check the product. If the replacement fuse blows, a short-circuit may be present and
the product should be discarded or returned to an authorized service facility for examina-
tion and/or repair.
6. Do not operate any fan with a damaged cord or plug. Discard fan or return to an
authorized service facility for examination and/or repair.
7. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar
area and where it will not be tripped over.
8. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk
of electric shock, this plug is intended to fit in a polar zed outlet only one way. If the plug
does not fit fully in the out et, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
CLEANING AND STORAGE
■ To clean your fan, f rst turn it OFF and UNPLUG the unit.
■ Use a soft cloth to wipe the housing. DO NOT use water or any other chemical solution
or cleaner. DO NOT soak or immerse the fan in water or liquid.
■ DO NOT ATTEMPT TO TAKE THE FAN APART.
■ Store in a dry place away from excessive heat and direct sunlight.
■ Regular cleaning will ensure optimum performance and appearance of the fan.
■ DO NOT kink the power cord when storing or while in use.
■ POLARIZED PLUG: This appliance has a
polarized plug (one blade is wider than the
other). To reduce the risk of electric shock,
this plug is intended to fit in a polar zed
outlet only one way. If the plug does not fi
fully into the outlet, reverse the plug and try
again. It if still does not fit, contact a
qualified el ctrician. DO NOT attempt to
change this safety feature.
Fig. 4
Fig. 2 Fig. 3
SPARE FUSE
5.0 A MAX
Spare fuse on
back of plug.
Fig. 5
FUSE
SPARE FUSE
5.0A MAX
3