Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Note: Heart rate is not measured correctly and incorrect data is
transmitted if the device is worn upside down or in the wrong direction.
First Steps
The appropriate software must be installed on the smartphone in order for the
heart rate data to be transmitted.
Important Notes
•
The transmitter and the strap must never be cleaned in the washing
machine or dryer.
•
Before hand washing the strap, remove the heart rate monitor transmitter
on which the electrodes are located.
•
When washing the strap, make sure that the water temperature does not
exceed 30 °C.
Replacing Batteries
The transmitter requires one CR2032 3V battery. The battery is already
installed. The battery usually lasts for one year. It is recommended to contact
the manufacturer or customer service when you need to replace the batteries.
1
Use a coin to open the
battery compartment cover
counterclockwise.
2
Remove the old battery and
insert a new battery into the
battery compartment with the
„+" side facing up.
3
Replace the battery
compartment cover by turning
it clockwise until it clicks into
place.
EN
17
Tabla de contenido
