Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATIONS
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
•
Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on pulley, camshaft or crankshaft. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
VEHICLES
1 Series
3 Series
5 Series
5 Series
6 Series
7 Series
7 Series
X1
X3
X3
X5
X6
Z4
Z4
USE
Camshaft sender-wheel locking tool (1/2/3),
to be used as OEM 114290, 118520
Sender-wheel locking tool
for engines N55
Sender-wheel locking tool
for engines N53 / N54
Sender-wheel locking tool
for engines N55
Timing chain pre-tensioning tool (4),
to be used as OEM 119340.
For pre-tensioning the timing chain, place a torque
wrench on the hexagon of the tool and tighten the
bolt with the specified torque.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Model
125i, 130i, 135i, M Coupe
323i, 325i, 330i, 335i
523i, 525i, 530i, Xi/xDrive
523i, 528i, 530i
630i
730i
730i, 740i
xDrive 25i, xDrive 28i
si, xDrive 25i, xDrive 30i
xDrive 28i
si, xDrive 30i
xDrive35i
Si
sDrive23i, sDrive30i, sDrive35i
RED
(3),
BLUE
(2),
SILVER
(1),
Tel.: 02196 720480
Fax.: 02196 7204820
(E81/82/87/88)
(E90/91/92/93)
(E60/61)
(F10/11)
(E63/64)
(E65/66)
(F01/02/04)
(E84)
(E83)
(F25)
(E70)
(E71)
(E85/86)
(E89)
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Year
2005 - 2014
2005 - 2014
2005 - 2010
2010 - 2011
2004 - 2011
2005 - 2008
2008 - 2015
2009 - 2011
2006 - 2010
2011 - 2017
2006 - 2010
2008 - 2010
2006 - 2009
2009 - 2017
Tabla de contenido
