Assembly - Ambiano HY-6318 Manual Del Usuario

Assembly

1. Unpack the grill and other necessary parts from the box.
2. Remove any unwanted packaging materials such as cardboard, plastics or
styrofoam.
3. Wipe clean all the parts with a soft damp cloth or sponge and warm water.
Rinse and dry thoroughly. DO NOT IMMERSE THE GRILL PLATE OR THE
TEMPERATURE PROBE IN WATER OR ANY OTHER LIQUID.
4. Place the base on a heat resistant flat, stable surface in a well-ventilated area.
5. Place the drip tray into the base on the side with the bigger opening.
6. Place the grill on the base by putting the temperature control receptacle into
the smaller notch end of the base first, then placing the other side down into
the correct position.
7. Make sure the temperature probe is turned off and insert it into the
receptacle with the power knob facing up.
DO NOT USE ANY ABRASIVE MATERIAL TO CLEAN THE SURFACE
DO NOT IMMERSE THE GRILL PLATE OR THE TEMPERATURE PROBE INTO
4
WATER OR ANY OTHER LIQUID AT ANY TIME
Assembly