Yamato 94717 Manual De Instrucciones página 23

Cod. 94717-94718-94719
Checking the engine oil.
Before starting the generator, ensure the crank case is filled to the top of the neck with
either SAE30 or 10W30, 4 storke oil.
1. before checking or refilling oil , besure the generator is put on even and stable
surface.
2. make sure the generator is switched off, by rotating the engine switch to the "off"
position.
3. remove the oil filler cap by rotating the cap anti-clockwise and wipe the dipstick
clean.
4. Check the oil level by inserting the dipstick into the filler neck without screwing it in.
5. If the oil level is below the top of the oil tank housing neck refill with either SAE30
(Single viscosity) or 10W30 (Multiviscosity) 4 stroke oil.
WARNING!
The oil will be contaminated or discoloured during use. Please change the oil regularly.
For more information, please see clause: MAINTENANCE
Oil warning system
The oil warning system is designed to prevent motor damage due to insufficient oil in the
crankcase. Before the level of oil in the crankcase falls below the safety marking, the oil
warning system switches off the motor automatically (the ignition switch stays in position
"ON"). If the oil warning system switches off the motor, refill motor oil..
Checking the engine fuel
Only fuel the generator in well-lit areas. Avoid fuel spillage. Never refuel the generator
during operation. Let the motor cool down for about two minutes before refueling.
Refueling must not be carried out near naked flames, control lamps or spark producing
electrical equipment such as electric tools, welders or sanders.
1. make sure the generator is turned off, by rotating the engine switch to the "off"
position.
2. check the fuel drain screw before fuel. Make sure it has been tighten.
3. check the fuel by a visual check , remove the fuel cap and fuel filter screen reviewing
the fuel level
4. if the fuel is low, pour in unleaded fuel from an approved fuel container into the fuel
tank, . because of fuel expands, please fill the tank as below picture only.
5. Turn the fuel cap clockwise to assembly it in position.
23