Safety Recommendations; Eu Declaration Of Conformity - SKF TKSU 10 Instrucciones De Uso

Safety recommendations

" Do not expose the equipment to rough handling
or heavy impacts.
" Always read and follow the operating
instructions.
" Opening the housing of the instrument may
result in hazardous mishandling and voids
warranty.
" The equipment should not be used in areas where
there is a risk for explosion.
" Do not expose the equipment to high humidity
or direct contact with water.
" All repair work should be performed by an
SKF repair shop.
" Using any other headset than the one supplied
with the instrument can cause internal damage
to the detector.

EU Declaration of Conformity

TKSU 10
We, SKF MPT, Meidoornkade 14, 3992 AE Houten,
The Netherlands herewith declare
under our sole responsibility that the products
described in these instructions for use, are in
accordance with the conditions of the following
Directive(s):
EMC DIRECTIVE 2014/30/EU
RoHS DIRECTIVE (EU) 2015/863 and the
harmonized standard: EN IEC 63000:2018:
Technical documentation for the assessment of
electrical and electronic products with respect to
the restriction of hazardous substances and are in
conformity with the following standards:
EN 61326-1:2013:
Electrical equipment for measurement, control
and laboratory use - EMC requirements -
Part 1: General requirements.
EN 55011: 2016 + A1:2017:
Industrial, scientific and medical (ISM) radio-
frequency equipment - Electromagnetic
disturbance characteristics - Limits and
methods of measurement.
EN 61000-4-2:2009:
Electromagnetic compatibility (EMC) -
Part 4: Testing and measurement techniques.
Section 2: Electrostatic discharge immunity test.
EN 61000-4-3:2006 + A1:2008 + IS1:2009
+ A2:2010:
Electromagnetic compatibility (EMC) -
Part 4: Testing and measurement techniques.
Section 3: Radiated, radio-frequency,
electromagnetic field immunity test.
Houten, The Netherlands, June 2022
Mrs. Andrea Gondová
Manager Quality and Compliance
EN 3