Brandt BHC6601X Manual De Instrucciones página 19

INSTALLATION
Before installing your wall canopy:

Please read the instructions carefully.

Unpack the canopy and check that all functions are working. Ensure that the
voltage (V) and the frequency (Hz) indicated on the serial plate match the
voltage and frequency at the installation site.

Check that the area behind the installation surface to be drilled is clear of any
electrical cables or pipes, etc.

The stainless steel and glass surfaces of the canopy are very easily damaged
during installation if grazed or knocked by tools. Please take care to protect
the surfaces during installation.

Protect the cooktop surface below with cardboard, or the like, to prevent
damage occurring whilst the wall canopy is being installed above.

The manufacturer shall not be liable for failure to observe all safety
regulations in force for the correct and normal operation of electrical parts.
Choose a venting mode:
Extraction-air mode
Venting knob position
Recirculation mode
Extraction-air mode: Turn
the venting knob here
means venting outside
Circulating-air mode:
Turn the venting knob
here means recirculation
19