Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CAM35
• Always follow the safety instructions of the vehicle manufacturer.
Some work (e.g. on retention systems such as the AIRBAG etc.) may only be performed by qualified specialists.
Observe the following instructions when working with electrical parts:
• When testing the voltage in electrical cables, only use a diode test lamp or a voltmeter.
Test lamps with a bulb consume too much voltage, which can damage the vehicle's electronic system.
• When making electrical connections, ensure that:
– they are not kinked or twisted
– they do not rub on edges
– they are not laid in sharp-edged ducts without protection (fig. 1, page 3).
• Insulate all connections.
• Secure the cables against mechanical wear by using cable binders or insulating tape, for example on existing
cables.
The camera is watertight. However, the seals on the camera cannot withstand a high-pressure cleaner (fig. 2,
page 3). Therefore, you should observe the following instructions when handling the camera:
• People (including children) whose physical, sensory or mental capacities or whose lack of experience or knowl-
edge prevent them from using this product safely should not use it without the supervision or instruction of a
responsible person.
• Do not open the camera, as this impairs the leak tightness and the function of the camera (fig. 3, page 3).
• Do not pull at the cables, as this impairs the tightness and the function of the camera (fig. 4, page 3).
• The camera is not suitable for use under water (fig. 5, page 3)!
3
Scope of delivery
No. in
fig. 6, page 4
1
2
3
4
5
–
–
–
EN
Quantity
Description
1
Camera CAM35
CAM35 REAR
CAM35 REAR NAV
CAM35 TWIN
CAM35 TWIN NAV
1
Seal
1
CAM35 Y adapter CAM
1
CAM35 Y adapter MON
1
System cable
1
NAV adapter (only CAM35 REAR NAV or
CAM35 TWIN NAV)
2
Fastening bolts 6 x 25 mm
–
Installation and operating manual
Scope of delivery
Ref. no.
9102000134
9102000133
9102000132
9102000131
–
9600000552
9600000553
9600000137
9600000554
11
Tabla de contenido
