Tabla de contenido
Idiomas disponibles
Idiomas disponibles
is complete, the LED status indicator will illuminate WHITE for 1 min then switch off. [7]
Charge the battery when removed from the product.
Remove the battery from the product by pressing the battery release buttons.
Insert the battery charger jack to the battery. The battery pack LED will illuminate RED when charging. When charging is
complete, the LED indicator will illuminate WHITE. [8]
NOTE: It is normal for the charger to become warm to touch when charging. Use only the charger supplied with your
product.
ACCESSORIES
Integrated Crevice Tools - ideal for accessing tight spaces.
Dusting Brush - ideal for cleaning surfaces without damaging or scratching.
Furniture Tool - ideal for cleaning surfaces like sofa.
Mini Power Nozzle* - ideal for deep cleaning textile surfaces (i.e. sofas) and pet hair removal. The working angle can be
adjusted when move backwards and forwards.
NOTE: After using, please rotate the brushbar release flap anti-clockwise with a coin to take out the brushbar, and then
remove hair / threads collected on the brush. [17]
All the accessories except cleaning tool can be fitted on the main product and on the tube. [4]
Long Crevice Tool* - Ideal for tight and difficult areas.
Cleaning Tool* - ideal to remove the dust, debris and hair in the dust bin or in the nozzle. [9]
ACCESSORY BAG*
Accessories can be stored in the accessory bag.
Wall Mount*
If required, fix the wall mount to the wall, using the two screws and plugs provided. [2]
CLEANER MAINTENANCE
Pre-filter maintenance reminder. If the pre-filter needs maintenance, the red light on the cleaner starts to blink in red colour.
Emptying the Dust Cup
1. Press the handheld release button and remove the tube. [5]
2. Press the dust cup empty button to release the bin flap and empty the contents. [9a]
3. Close the dust cup flap, you will hear a click when fully locked.
NOTE: It is recommended to empty the dust cup after each use or when dust is up to the max fill line.
Quick Daily Cleaning of Dust Cup
Just open the dust bin flap and remove the dust with the help of the cleaning tool.
1. Use the hook end to pull out the dust collected inside the dust bin. [9b]
2. Use the brush end to clean the fine dust stuck around the metal mesh filter. [9c]
Cleaning the Dust Cup and Filter
The LED indicator on the product will flash RED to indicate the cleaning Pre-motor Filter is required.
1. Press the handheld release button and remove the handheld unit from the tube. [5]
2. Press the battery release button and remove the battery.
3. Remove the dust bin assembly by turning it clockwise and pulling away from the unit. [10]
4. Remove the Pre-Motor filter pulling the support from the bin assembly. [11a]
5. Remove the single cyclone system pulling the metal ring from the bin assembly. [11a]
6. Remove vortex finder by rotating clockwise and pull from the cyclone system. [11b]
7. Wash the filter and single cyclone system in lukewarm water and leave to dry for 24 hours. [12,13]
8. Reassemble once completely dry and refit to the product.
NOTE: Do not use hot water or detergents when cleaning the pre-motor filter. In the unlikely event of the pre-motor filter
becoming damaged, fit a genuine Hoover replacement. Please ensure you refit the pre-motor filter before assembling dust
bin to cleaner main body otherwise the filter protection mechanism will be activated.
IMPORTANT: For optimum performance, always keep your filter clean. We recommend that the filter should be washed
at least once a month.
* Certain Models Only
7
GB
Tabla de contenido
