Cleaning And Maintenance; Storage; Information About Recycling And Disposal; Meaning Of The Marking - Parkside PSHL 2 D1 Instrucciones De Funcionamiento Y De Seguridad

z Cleaning and maintenance
Do not use any abrasive detergents to
„
clean the helmet casing
Never allow the UV filter
„
contact with water.
Clean the product with a soft and dry or
„
moistened cloth or clean it with a cloth
moistened with disinfectant.
z Storage
Keep the device in a dry location and
„
out of the reach of children.
During storage, make sure the LED light
„
switch is switched off (left position
14
"OFF").
z Information about recycling
and disposal
Don't throw away – recycle!
Please return this device, accessories
and packaging to your local
recycling depot.
Do not dispose of the automatic welding
helmet in household waste, in fire or in
water. Devices that are no longer functional
should be recycled wherever possible.
Ask your local stockist for advice.
As the consumer you are legally
obliged (by the German Battery
Ordinance) to return any and all
used batteries. Batteries containing harmful
substances are labelled with the adjacent
symbol, which indicates the prohibition on
disposal in household waste. The abbrevia-
tions for the relevant heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead.
.
2
to come into
8
Take used batteries to a waste management
company in your city or community or return
them to your dealer. This satisfies your legal
obligations while also making an important
contribution to protecting the environment.
Note the labelling on the packaging
and separate the packaging
material components for disposal if
necessary. The packaging material
is labelled with abbreviations (a) and
numbers (b) with the following mean-
ings:1–7: Plastics, 20–22: Paper and
cardboard, 80–98: Composites.
z Meaning of the marking
Safety viewing pane tested in
accordance with DIN EN 166
(C6316CMC, C6317CMC,
C6318CMC):
• Viewing pane: CMC F CE
CMC = Manufacturer code
F = mechanical resistance
(low-velocity impact at 45 m/s)
CE = CE mark
• Rear lens: CMC 1 F CE
CMC = Manufacturer code
1 = Optical class
F = mechanical resistance
(low-velocity impact at 45 m/s)
CE = CE mark
ADF tested in accordance with
DIN EN 379: 4/5-9/9-13 CMC
1/1/1/2/379 CE (C6606CMC)
Explanation:
4 = light condition
5-9/9-13 = dark conditions
CMC = Manufacturer code
Digit 1 = Optical class
Digit 2 = Scattered light class
GB/IE/NI/CY/MT
15