Cleaning And Maintenance - Gymrex GR-FB 400 Manual De Instrucciones

All the joints of the unit should be properly fastened and tightened. The unit
may be put into operation after these installation steps have been completed.

3.3. Cleaning and maintenance

a) Use only non-corrosive cleaning agents for cleaning the surfaces.
b) After each cleaning, all the parts should be dried well before the unit is used
again.
c) Store the unit in a dry and cool place protected from moisture and direct
sunlight.
d) Do not spray the unit with a stream of water or immerse it in water.
e) Perform regular inspections of the unit checking technical fitness and any
damages.
f) Use a soft, damp cloth for cleaning.
g) Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) for
cleaning, as these may damage the surface of the material from which the unit
is made.
h) Do not clean the unit with acidic substances, medical products, diluent, fuel,
oil or other chemicals as this may cause damage to the unit.
i) Check the mountings each day before using the unit.
j) Check the stability of the installed backrest and seat every day before using the
unit.