Tabla de contenido
HOW TO SET THE TIME (RTC)
Hold pushed the DOWN key (5) till the
Min label is displayed.
Use the UP and DOWN KEY to browse
the parameters.
-
TO MODIFY: push the SET
button and then the UP and
DOWN keys.
-
TO CONFIRM: push the SET
button.
TO EXIT THE RTC MENU: push both
SET+UP keys or wait for 5 sec.
HOW DISPLAY / MODIFY THE SET
POINT OF THE HOLDING PHASE
-
TO DISPLAY: push
release the SET key (6), the
holding
set
selected cycle is displayed for
5 sec.
-
TO MODIFY: while the
point is displayed hold pushed
the SET key till the HdS label
start flashing. Use the UP and
DOWN key to modifiy the
value..
TO CONFIRM: push the SET key to
confirm the value and exit.
HOW MODIFY A CYCLE:
1.
Push the
seconds till the first parameter (CyS)
is displayed.
2.
Use the UP and DOWN keys to
browse the parameters.
3.
To modify a parameter push the SET
key and use the arrow keys.
4.
Confirm the new value by pushing the
SET key.
5.
The new value is recorded even if the
programming is exited by time out.
1592006207 XB570L GB r1.1 26.08.2015
and
point
of
the
set
key (6) for several
UP key: browse the
menu:
- Min= minutes
- Hou= hours
- daY= day
- Mon= month
- YEA= year
- tiM= US/EUROPE time
In
holding set point of the
cycle 1 is modified.
XB570L
this
example
the
In this example
the set point of
the holding
cycle is
modified.
6 /20
Tabla de contenido
