Introducing New Hand Transmitters - Waeco MagicSafe MS150 Instrucciones De Montaje Y D’uso

MSK-150_09092003.qxd
The magic safe MSK-150 system can be operated with up to 4
transmitters. To use a new hand transmitter with your system it is simply
necessary to introduce the transmitter to the system, as follows:
Press the blue button on the new hand transmitter
to teach it to the system. Once you teach a new
transmitter to the system then the codes for all
must be re taught to the system again by pressing
the blue button of all existing hand transmitters.
10 seconds but the 10 seconds timmer will be reset
each time a new hand transmitter is taught to the system.
Therefore, the user will always have 10 seconds
After 10 seconds the learn mode is closed automatically.
Remark! Once you teach a new transmitter to the system
then the codes for all existing transmitters will be deleted and
so they must be retaught to the system again.
16.03.2004 8:19 Uhr
All manuals and user guides at all-guides.com

Introducing new hand transmitters

Disarm the magic safe MSK-150
Turn the ignition ON.
Press and hold the grey button for
3 seconds of an existing hand transmiiter.
The magic safe MSK-150
is now in the learn mode.
existing transmitter will be deleted. So they
The system will remain in the learn mode for
to teach transmitter to the system.
Seite 43
43