Waeco MagicSafe MS150 Instrucciones De Montaje Y D’uso página 29

MSK-150_09092003.qxd
Warning! Improper cable connections may result in short
circuits which can cause:
• cable fires
• triggering of the airbag
• damage to electronic control equipment
• failure of electrical functions
(blinkers, brake lights, horn, ignition, lights).
Please note the following:
For working on the cables, the following terminal designations
are used:
30 (input from battery plus direct)
15 (switched plus, behind battery)
31 (return cable from battery, neutral)
The securest form of connection is by soldering the cable ends and
then insulating the connection.
For releasable connections, use only insulated cable brackets, connector
plugs and tabs. Do not use lustre terminals. For connecting the cables
with cable brackets, plugs or tabs, use crimping pliers.
For cable connections to 31 (earth):
Attach the cable with a bracket and toothed washer to an earthing screw
on the vehicle or screw it onto the metalwork of the vehicle using a
bracket, metal screw and toothed washer.
Always ensure a good earthing connection!
Warning! Because of the risk of short circuits, always
disconnect the negative pole of the battery before starting
work. At vehicles with a supplementary battery, also
disconnect this negative pole.
Caution! On disconnecting the negative pole of the battery,
all the volatile memories of the convenience electronics will
lose their stored data.
16.03.2004 8:19 Uhr
All manuals and user guides at all-guides.com
Safety and installation instructions
Seite 29
29