Over-Temperature Protection; Residual Heat Warning; Default Working Times; Cooking Guidelines - DRIJA ALEMANIA 90 Professionale Manual De Instrucciones

Topes vitrocerámica
Ocultar thumbs Ver también para ALEMANIA 90 Professionale:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Touch timer control again, the "1" will flash.
set the time by touching the slider control (e.g.9), now the timer
you set is 95 minutes.
When the time is set, it will begin to count down immediately.
The display will show the remaining time
When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
Note:
a)The red dot next to power level indicator will illuminate indicating that zone is selected.
b) you want to change the time after the timer is set, you have to start from step 1.

3.3.6 Over-Temperature Protection

A temperature sensor equipped can monitor the temperature inside the ceramic hob. When an excessive
temperature is monitored, the ceramic hob will stop operation automatically.

3.3.7 Residual Heat Warning

When the hob has been operating for some time, there will be some residual heat. The letter " H "appears
to warn you to keep away from it.

3.3.8 Default working times

Another safety feature of the hob is automatic shutdown. This occurs whenever you forget to switch off a
cooking zone. The default shutdown times are shown in the table below:
Power level
Default working timer (hour)

4. Cooking Guidelines

Take care when frying as the oil and fat heat up very quickly, particularly if you're using
PowerBoost. At extremely high temperatures oil and fat will ignite spontaneously and this
presents a serious fire risk.

4.1 Cooking Tips

When food comes to the boil, reduce the power setting.
1
2
3
4
8
8
8
4
EN-13
5
6
7
8
4
4
2
2
9
2

Capítulos

Tabla de contenido
loading

Tabla de contenido