How To Use; Start Cooking - DRIJA ALEMANIA 90 Professionale Manual De Instrucciones

Topes vitrocerámica
Ocultar thumbs Ver también para ALEMANIA 90 Professionale:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the
cooking zone. Always centre your pan on the cooking zone.
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.

3.3 How to use

3.3.1 Start cooking

After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that
the ceramic hob has entered the stat of standby mode.
Touch the ON/OFF
show "-"
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touching the heating zone selection control, and a indicator
next to the key will flash
Adjust heat setting by touching the slider control.
• If you don't choose a heat setting within 1 minute, the
ceramic hob will automatically switch off. You will need to
start again at step 1.
• You can modify the heat setting at any time during
cooking.
• You can modify the power level from 0 to 9 by the slide
control.
control. all the indicators
EN-9

Capítulos

Tabla de contenido
loading

Tabla de contenido