I Updating Connected Cleaners - Polaris W Serie Instrucciones De Instalación

5.4 I Updating connected cleaners

Connected cleaners can be updated with new developed functions or product improvements. Users cannot always see
these improvements.
The cleaner cannot be controlled by the app until the update has been installed.
When an update is available (visible in the iAquaLink™ app, see image
you press the start installation button:
• Place the cleaner and the control box as close as possible to the home Wi-Fi router;
• Check the strength of the home WiFi signal.
• Leave the control box connected to the mains and the cleaner connected to the control box until the installation has
finished;
• The control box must be connected to the home Wi-Fi network and the iAquaLink™ app must be open.
Start the update:
• Press the button (see image
• A message is displayed during the update (see picture
finished. The update time is usually 10 to 20 minutes;
• A message is displayed when the update is finished (see image
• If there is a problem with the installation an error message is displayed after 60 minutes (see image
User alerts").
* iAquaLink™ app messages may be subject to change.
Recycling
This symbol is required by the European directive DEEE 2012/19/EU (directive on waste electrical and electronic
equipment) and means that your appliance must not be thrown into a normal bin. It will be selectively collected
for the purpose of reuse, recycling or creating value. If it contains any substances that may be harmful to the
environment, these will be eliminated or neutralised. Contact your retailer for recycling information.
29
) to start the installation using the iAquaLink™ app;
( )
) here are some recommendations before
); a cleaning cycle cannot be started until the update is
).
ou
PrOG
Message
Er 12 ou
Code
), see § "5.2 I
Very fast
Flashing LED
x5
Flashing LED