Perating Conditions - SUHNER ABRASIVE LRG 20 Documentación Técnica

500mm (art.no. 45022641)
2.3.4 e din 10 / g16
xtension systems
Hand piece FH 4
0mm (art.no. 45022650)
250mm (art.no. 45022660)
500mm (art.no. 45022661)
2.4 o

PerAting conditions

Temperature range during operation: 0 to +40°C
Relative air humidity: 95% at +10°C not condensed
3.
haNDLINg
3.1 t
ools
See the SUHNER operating instructions for hand
tools, for changing and installing tools and for
work instructions.
4. S
ERvICE
4.1 P
reVentiVe mAintenAnce
Without a tool clamped in check no-load
speed periodically and after each mainte-
nance. Even if the machine still operates
perfectly, the motor should be removed, cleaned and the
four slides checked for wear by a specialist after approx.
300 to 400 operating hours.
4.1.1 r
ePlAcement of the exhAust Air hose
Detach the exhaust air hose from the swivel ring, and re-
place it.
3.7m/s , K=3.0m/s
2 2
Vibration EN ISO 28927-12
6.0m/s , K=3.1m/s
2 2
2.9m/s
, K=0.9m/s
2 2
2.2m/s , K=0.9m/s
2 2
/ o
PERaTIoN
/ m
aINTENaNCE
4.1.2 r
ePlAcement of the suPPly hose
Remove the exhaust air hose (see 4.1.1).
Detach the hose clip, and pull the supply hose off the
connection nipple.
17