Tabla de contenido
Idiomas disponibles
Idiomas disponibles
safety helmets with visors, hearing protection must be
worn.
d ) Accidental start-up hazard. Before doing work on the
appliance, remove the plug.
e ) Injury hazard. Before pressing the trigger, grip the gun
firmly to counteract the recoil.
f ) Contamination hazard. Comply with the
requirements of the local water supply company.
According to DIN 1988, the appliance may only be
connected to the mains drinking water supply if
a backow preventer valve with drain facility is
installed in the supply hose. Water that has flowed
through backflow preventers is considered to be non-
potable.
g ) Accident hazard. Maintenance and/or repair of
electrical components must be carried out by qualified
and Authorized BLACK+DECKER staff for the warranty
to take effect. If the supply cord is damaged, it must
be replaced by the manufacturer, an Authorized
BLACK+DECKER service centre or an equally qualified
person in order to avoid a hazard. If the supply cord
is replaced by an equally qualified person, but not
Authorized by BLACK+DECKER, the warranty will lose
effect.
h ) Injury hazard. Discharge residual pressure before
disconnecting the unit hose.
i ) Accident hazard. Before using the appliance, check
every time that the screws are fully tightened and that
there are no broken or worn parts.
j ) Explosion and electric shock hazard. Only use
detergents which will not corrode the coating materials
of the high pressure hose/electrical cable.
k ) Injury hazard. Ensure that all people or animals keep
a minimum distance of 16yd. (15M) away.
3) Improper use
a ) Use by unskilled persons or those who have not read and
understood the instructions in the manual is forbidden.
b ) The equipment is not designed to be used by
people (including children) with physical, sensory
or mental capabilities reduced or no experience or
knowledge,unless they are supervised or instructed in
the use by a person responsible for their safety.
c ) It will be monitored to ensure that children do not play
with the appliance.
d ) The introduction of inflammable, explosive and toxic
liquids into the appliance is prohibited.
e ) Use of the appliance in a potentially inflammable or
explosive atmosphere is forbidden.
f ) The use of non-original spare parts and any other spare
parts not specifically intended for the model in question
is prohibited.
WARNING! All modifications to the appliance are
prohibited. Any modifications made to the appliance
shall render the Declaration of Conformity null and
void and relieve the manufacturer of all liability under
civil and criminal law.
WARNING! Inadequate extension cords can be dangerous.
If an extension cord is used, it shall be suitable for outdoor
use, and the connection has to be kept dry and off the
ground. It is recommended that this is accomplished by
means of a cord reel which keeps the socket at least 60mm
above the ground.
WARNING! This machine has been designed for use
with the cleaning agent supplied or recommended by
the manufacturer. The use of other cleaning agents
or chemicals may adversely affect the safety of the
machine.
WARNING! High pressure jets can be dangerous if
subject to misuse. The jet must not be directed at
persons, live electrical equipment or the machine itself.
WARNING! Do not use the machine within range of
persons unless they wear protective clothing.
WARNING! Do not direct the jet against yourself or
others in order to clean clothes or foot-wear.
WARNING! Risk of explosion – Do not spray flammable liquids.
WARNING! High pressure cleaners shall not be used by
children or untrained personnel.
WARNING! High pressure hoses, fittings and couplings are
important for the safety of the machine. Use only hoses,
fittings and couplings recommended by the manufacturer.
WARNING! To ensure machine safety, use only original spare
parts from the manufacturer or approved by the manufacturer.
WARNING! Water that has flowed through backflow
preventers is considered to be nonpotable.
WARNING! Do not use the machine if a supply cord
or important parts of the machine are damaged, e.g.
safety devices, high pressure hoses, trigger gun.
WARNING! Incorrect fuels shall not be used as they
may prove hazardous.
WARNING! Do not use near people except that they
use protective clothing.
WARNING! Hearing protection must be used when
using this equipment.
4) Service
a ) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Labels on Tool
The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ......................... volts
Hz ....................... hertz
min ..................... minutes
or DC ...... direct current
...................... Class I Construction
(grounded)
ENGlIsh
.../min .............. per minute
BPM .................... beats per minute
IPM ..................... impacts per minute
RPM .................... revolutions per
minute
25
Tabla de contenido
