Sime B-Home Round 25 Manual Del Usuario página 80

D) Place the last cast iron deflector
E) Screw the brass reduction by interposing the sealant for the hydraulic seal
F) Screw the safety thermostat to the reduction
Fig. 9
Fig. 10 Flue gas damper
80
Fig. 8
Safety thermostat
Last deflector
CAUTION:
Screw the thermostat by hand or with a fork spanner: tightening
torque of 1.5 Nm
WARNING:
When installing a pellet boiler, the flue gas damper must be
open.
To prevent the damper from closing unintentionally, lock it in
place by tightening nut "A" or attaching a tie rod between points
"B" and "C".