Idiomas disponibles
Idiomas disponibles
USE
1. Connect the low pressure adaptor (4) to the low pressure hose (7).
2. Fill the syringe (3) with 3-6 ml of fluorescent liquid.
3. Mount the syringe (3) on the low pressure hose (7).
Attention: Observe the air conditioning safety instructions of the vehicle manufacturer.
4. Connect the low pressure adaptor (4) to the inlet of the air conditioning circuit.
5. Inject the fluorescent liquid into the air conditioning circuit.
6. Disconnect the low pressure adaptor (4) from the air conditioner.
7. Starten Sie den Motor und schalten Sie die Klimaanlage für einige Minuten auf maximale
Kühlleistung ein, damit sich die fluoreszierende Flüssigkeit im gesamten Kreislauf der
Klimaanlage verteilt.
8. Start the engine and switch on the air conditioning system for a few minutes at maximum cooling
capacity so that the fluorescent liquid is distributed throughout the air conditioning system.
Attention: Wear the UV protective goggles (5). The UV lamp (6) emits intense ultraviolet light, which
can hazard your eyes if you do not wear UV protective goggles. Do not look directly into the light
beam of the UV lamp during operation. Exposure to UV light, even for a short period of time, can
hazard your eyes.
9. Use the UV lamp (6) to check all components of the air conditioning system for leaks.
NOTICE
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
