Idiomas disponibles
Idiomas disponibles
Pic. 1
1.
Vice
2.
Drill
3.
V-guide
Pic. 2
1.
Knife sharpening notches
2.
Scissor sharpening notch
Pic. 3
1.
Hand protection
2.
Magnet
3.
Angle adjusting handle
4.
Distance piece
Introduction
To enjoy your new multi-purpose sharpener as long as
possible, we kindly request you to carefully read the
Operating Instructions and the attached safety instructions
before putting the appliance into operation. Further, we
recommend keeping the Operating Instructions in case
you have any doubts about the multi-sharpening features
at any time later. We reserve the right to make technical
changes to improve the product in its further continuous
development.
This document includes the original Operating Instructions.
Parts of the multi-purpose sharpener
1. On/off
2. Knife and scissor sharpening adapter
3. HSS drill sharpening adapter
4. Plane and chisel blade sharpening adapter
5. Mounting holes
Technical specifications
Voltage/frequency:
Engine power:
Revolutions:
Grinding disk diameter:
Max. drill diameter:
Min. drill diameter:
Knife width:
Protection class:
Noise:
Weight:
General safety instructions
When using electric devices you must follow the basic
safety regulations to prevent fire hazard, electric
shock and injury of persons including the following:
Please read and follow all instructions before putting the
appliance into operation.
Keep the safety instructions for future reference!
Safe working
Keep the place of your work clean!
Mess in the place of your work can result in injuries.
Consider the environment influences!
Do not expose the appliance to rain.
Do not use the appliance in a moist or wet environment.
Ensure appropriate lighting.
Do not use the appliance near flammable liquids or gases.
Protect yourself against electric shock!
Avoid any contact with earthed parts.
220-240V~50 Hz
65 W (S2 8min)
-1
7000 min
51mm
13mm
3mm
6mm-51mm
II
85 dB (A)
L
WA
1,53kg
10
Keep other persons in a safe distance!
Do not let other persons, especially children, touch the
cable. Keep them in a sufficient distance from the place of
your work.
Store the appliance properly!
An appliance that is not used should be stored in a dry,
locked place out of reach of children.
Do not overload your appliance!
You will work better and safer at output for which the
appliance has been designed.
Use the correct appliance!
Do not use an appliance with low power for heavy work.
Do not use the appliance for purposes for which it has not
been designed.
Wear appropriate working clothes!
Do not wear loose clothes or jewels as they could be
caught by movable parts. For working outdoors, we
recommend shoes with a non-slip sole. Wear a hairnet if
.
your hair is long
Use protective aids!
Protective glasses should always be worn. Use a breathing
mask when working in a dusty environment.
Do not use the cable for any other purposes than for
which it has been designed!
Do not use the cable for pulling the plug out of socket;
protect it against excess temperatures and sharp edges.
Secure the processed materials!
To secure the processed material, use a clamping device
or a vice. Materials will be secured better this way than
using your hand.
Avoid abnormal body posture!
Make sure you are stable to keep balance at all times.
Care for your tools!
Keep the tools sharp and clean; you will be able to work
better and safer. Follow the maintenance regulations and
tool replacement instructions. Check the tool cable
regularly and have it replaced by an authorised specialist if
damaged. Check the extension cable regularly and replace
it if damaged. Keep the handles dry, with no signs of oil
and grease.
Pull the plug out of socket!
When not using the appliance, before maintenance or
when replacing the grinding disk.
Never leave tools that are switched on in the
appliance!
Make always sure all wrenches and adjusting tools have
been removed before switching the appliance on.
Prevent unintentional appliance switch-on!
Make sure the switch is in the "off" position when plugging
the appliance.
Extension cable for outdoor use:
Authorised extension cables with appropriate marking
must only be used outdoors.
Pay attention!
Pay attention to what you are doing. Use common sense
when working. Do not use the appliance when you are
tired.
Check whether the appliance is not damaged!
Protection equipment and slightly damaged parts need to
be checked carefully whether they still work perfectly
before being used again. Check whether the movable
components work perfectly and are not jammed or
