Tabla de contenido
Idiomas disponibles
Idiomas disponibles
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.
PROBLEM
Tines will not rotate
Motor fails to start when bail is
pulled
The tines stop rotating
This product has a Five-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
TROUBLESHOOTING
POSSIBLE CAUSE
Tines are clogged by dirt and
debris.
Vines, grass or other debris
wrapped around tine shaft.
Battery is not secure.
Battery is not charged.
The unit is overloaded.
or call (toll free) 1-800-525-2579.
11 — English
SOLUTION
Remove the battery pack, then remove any obstruc-
tion from the tines.
Remove the battery pack, then clean the tine shaft.
To secure the battery pack, make sure the latches
on each side of the battery pack snap into place.
Charge the battery pack according to the instructions
included with your model.
Release the bail and raise the tines. Restart the til-
ler and slowly lower the tines back to their original
depth.
Tabla de contenido
