Before You Call For Service; How To Set The Oven Controls - Becken BMW4474 Manual De Instrucciones

Note:
- If you have any questions about the grounding or electrical instructions,
consult a qualified electrician or the Customer Support Service.
- Neither the manufacturer nor the dealer can accept any liability
for damage to the oven or personal injury resulting from failure to
observe the electrical connection procedures.
The wires in this cable main are coloured in accordance with the
following code:
Green and Yellow = EARTH
Blue = NEUTRAL
Brown = LIVE

BEFORE YOU CALL FOR SERVICE

If the microwave oven fails to operate:
1. Check to ensure that the microwave oven is plugged in securely. If it
is not, remove the plug from the outlet, wait 10 seconds, and plug it in
again securely.
2. Check for a blown circuit fuse or a tripped main circuit breaker. If
these seem to be operating properly, test the outlet with another
appliance.
3. Check to ensure that the control panel is programmed correctly and
the timer is set.
4. Check to ensure that the door is securely closed engaging the door
safety lock system. Otherwise, the microwave energy will not flow into
the microwave oven.
IF NONE OF THE ABOVE RECTIFIES THE SITUATION, CONTACT
A QUALIFIED TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR
THE MICROWAVE OVEN YOURSELF.

HOW TO SET THE OVEN CONTROLS

Signals during microwave oven settings
ONE SIGNAL: Microwave oven accepts the entry.
TWO SIGNALS: Microwave oven does not accept the entry, check and
try again.
AF BECKEN MANUAL microondas_23L Sku7190302 BMW4474 2020.indd 13 AF BECKEN MANUAL microondas_23L Sku7190302 BMW4474 2020.indd 13
Microwave Oven | Horno Microondas | Forno Microondas
EN
13
29/01/2021 12:47 29/01/2021 12:47