Kyocera KM-C830D Manual De Operaciones página 12

Press the P P P P P cursor key and then enter the next 3 digits of
12
the IP address into the next highlighted block.
Inch specification
Metric specification
Continue the same procedure for the other 2 blocks and,
13
once the IP address has been entered, press the Enter key.
Inch specification
Metric specification
14 Use the M and N cursor keys to select "Subnet Mask" and
then press the Enter key.
Inch specification
Metric specification
All manuals and user guides at all-guides.com
Repeat steps 11 - 13 in order to enter the Subnet Mask
15
using the same procedure that you did for entering the IP
address.
Inch specification
Metric specification
16
Use the M and N cursor keys to select "Gateway" and then
press the Enter key.
Inch specification
Metric specification
Repeat steps 11 - 13 in order to enter the Gateway address
17
using the same procedure that you did for entering the IP
address.
Inch specification
Metric specification
Once you are finished making all of the network settings,
18
press the Copier key. The machine will switch back to the
copier mode.
2. Set-up
7