Machine Information; Technical Specifications - VONROC CS502AC Traducción Del Manual Original

EN

2. MACHINE INFORMATION

Intended use
This circular saw is intended for lengthwise, cross-
wise and bevel cutting in wood while keeping the
baseplate resting firmly on the workpiece. Sawing
plastics or metals is not permitted.
The power tool with the fitted sawblade is designed
with sufficient capacity for sawing hardwood and
softwood as well as chipboard and fibreboard. The
sawblade is not designed for cutting firewood. Do
not use the saw to cut materials other than those
specified described in manual.

TECHNICAL SPECIFICATIONS

Model No.
Voltage
Frequency
Power input
No load speed
Saw blade size
Sawing capacity 0°
Sawing capacity 45°
IP Class
Weight
Sound pressure level LPA
Sound power level LWA
Vibration
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
8
CS502AC
230-240 V~
50 Hz
1200W
5500/min
Ø185x Ø20x2.4mm
65mm
43mm
IP20
3.47 kg
92.8 dB(A), K=3dB(A)
103.8 dB(A), K=3dB(A)
3.201 m/s2 K=1.5 m/s
2
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work pat-
terns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. Handgrip
2. On/off switch
3. Lock-off button
4. Power cord
5. Auxiliary handle
6. Scale for bevel angle
7. Clamping bolt for bevel angle
8. Cutting mark, 45°
9. Cutting mark, 0°
10. Clamping bolt for parallel guide
11. Dust extraction port
12. Lever for retracting lower guard
13. Upper guard
14. Lower guard
15. Clamping bolt
16. Clamping flange
17. Baseplate
18. Saw blade
19. Spindle lock
20 Lever for depth adjustment
21.Scale for depth adjustment
22. Parallel guide
23. Carbon brush screw
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
Replacing the saw blade (Fig. A, B)
When mounting the saw blade, wear
protective gloves. Danger of injury when
touching the saw blade.
Only use saw blades that correspond with
the characteristic data given in the
operating instructions.
Do not under any circumstances use
grinding discs as the cutting tool.
WWW.VONROC.COM