Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation Details
Dimensions in millimetres (Inches)
Example: 014 O' ring ported Valve with
Manifold Mount & Straight Handle (port type C)
The valve is pre-assembled for test using 4 off 5/16"-18UNC
through bolts, nuts, & washers. Some dis-assembly is required
for installation, during which care should be taken not to allow
debris to enter the valve. See manual for further details.
4 x 5/16"-18UNC, through bolts
See 014 O' ring port template
4 x C/bores for 014 type O'rings (BS1806).
Ø15.9 (0.63") x 1.26 (0.05") deep.
Mounting Holes:
Ø8.2 (0.32") x 4 Posn's
Equi-spaced on
pitch circle diameter
67.3 (2.65")
Manifold Holes: Ø8.0 (0.31") x 4 Posn's Equi-spaced on
pitch circle diameter 25.4 (1.00")
Mounting Holes: Ø8.2 (0.32") or 5/16"-18 UNC-2B
x 4 Posn's Equi-spaced on pitch circle diameter 67.3 (2.65")
B
T
P
A
Dimensions for BSPP plug only
NPTF & SAE plugs do not sit proud
Standard / Panel Mount Template
Top Cap (Panel Mount Only)
45°
014 O' ring Port Template
A
P
45°
3 Side Ported Valve (Code 3A, Table 6).
Port A open (B plugged)
Ø52.0 (2.05") Hole for
T
B
35.0
(1.38")
B
P
T
A
7
Tabla de contenido
