Safety Instructions; Charge The Battery; Maintenance And Care - Würth MINI Traducción Del Manual De Instrucciones De Servicio Original

Use only genuine Würth accessories
and spare parts.
The use of non-genuine spare parts, brushes
and accessories can impair the safety and or
function of the appliance.
This lamp complies with all relevant norms
and standards in connection with CE confor-
mity. If the lamp is modified, compliance with
these standards is no longer guaranteed.
It is forbidden to make any modifications
to the device or to manufacture additional
equipment. Such changes may result in
personal injury and malfunction.
Note
This is a torch. The included LED lamp \[
halogen lamp, krypton lamp...] is intended
for this purpose only.
The device is not suitable for room lighting
in the home.

Safety instructions

Warning against hot
surfaces!
The lamp can become hot in the
area of light emission. There-
fore, keep a distance of at least
• Do not cover the light emission.
• Do not place the lamp with the light
emission pointing downwards.
Only use the charger recommended by the
manufacturer to charge the lamp. Use of
a charger that is NOT recommended may
cause a fire and destroy the lamp.
Do not open the lamp. There is a risk of a
short circuit. Repairs to the unit may only
be carried out by persons authorised and
trained for this purpose. Always use original
spare parts from Würth. This ensures that the
safety of the unit is maintained.
A damaged lamp or charger may
no longer be used and may only be
replaced by the manufacturer.

Charge the battery

Charge before first use.
Charging time: 6-8 h
Switch off the light during charging.
Note
Always keep the charging socket of the lamp
free of dirt.

Maintenance and care

Visual inspection before starting
work
The lamp is maintenance-free. Nevertheless,
the lamp and accessories must be checked for
external damage before each use.
If damage is visible, the lamp must
not be used. It must be repaired or
disposed of by a commissioned and trained
person. Please contact your Wurth branch.
Cleaning
Switch off the lamp and disconnect the mains
plug before carrying out any cleaning work.
To clean the lamp, wipe with a clean, soft
cloth. Remove stubborn dirt with a damp cloth
and a standard household cleaner. Never
use cleaning agents containing alcohol,
solvents or abrasives as these will damage
the housing.
Storage
Fully charge the fixture before storing it for
an extended period of time. Recharge the
lamp regularly if it is not used for a longer
period of time.
13