Cleaning And Maintenance; Troubleshooting - Imetec M0201 Instrucciones De Uso

Plates open at 180° [Fig. G]
In this position, the cooking surface is doubled so more food can be cooked at the same time.
• Turn the thermostat knob to the required temperature.
• Switch the device on by turning the I/O knob to position 'I'.
• When the set temperature has been reached, the ready-for-use LED (green) will light up.
• Open the upper plate before it reaches the end of its stroke.
• Press the 180° opening button [Fig. H]
• Rotate the upper plate 180° until the handle is resting on the worktop surface [Fig. G].
• Place the food on both plates and turn it over when half cooked, if necessary.
Cooking times can vary according to food thickness, food temperature and personal taste.
Switch the device off by turning the I/O knob to position 'O'.
• Unplug the device.
• Leave it to cool down completely.
• Take out the liquid collection tray (Fig. F) and empty it.
• Press the release buttons to remove the plates.
WARNING! Always disconnect the appliance from the mains
before cleaning or performing maintenance.
WARNING! Risk of fire. Wait for the appliance to cool
completely before storing it.
• Wash the plates by hand or in the dishwasher at a maximum temperature of 55°C.
• Do not use abrasive sponges or metal tools, which could damage the non-stick coating.
• Clean the outer sides and the control panel with a damp and well-wrung sponge. Dry with a dry cloth.
PROBLEM
The food is not cooked enough.
The product emits smoke.
The product does not turn on.

CLEANING AND MAINTENANCE

TROUBLESHOOTING

SOLUTION
• Increase the temperature by turning the
thermostat knob clockwise, or extend the
cooking time.
• Let it operate empty the first time it is used, to
disperse the fumes and the typical smell of a
new appliance.
• Make sure the plug is correctly inserted in the
socket.
• Make sure the switch has been turned on by
rotating the I/O knob to 'I'.
EN
16