Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Blade diameter
Hole (arbor) diameter
Max. miter angle
Max. bevel angle
No load speed (RPM)
Laser type
Dimensions (L x W x H)
Rated voltage
Standard battery cartridge
Charger
Net weight
Max. Cutting capacities (H x W) with blade 165 mm (6-1/2") in diameter
45° (left and right)
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or BATTERY-
operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or
1.
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Miter angle
0°
Left 45° (46° when using release lever),
Right 45° (46° when using release lever)
Wavelength 655 nm, Maximum output
340 mm x 400 mm x 440 mm
(13-3/8" x 15-3/4" x 17-1/4")
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B /
DC18RC / DC18RD / DC18SD / DC18SE / DC18SF
6.3 - 6.6 kg (13.9 - 14.6 lbs)
45° (left)
30 mm x 92 mm
(1-3/16" x 3-5/8")
30 mm x 65 mm
(1-3/16" x 2-9/16")
(1-13/16" x 2-9/16")
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3.
Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
2 ENGLISH
XSL05
165 mm (6-1/2")
15.88mm (5/8")
Left 52°, Right 52°
5,000 /min
1mW (Laser Class II)
D.C. 18 V
BL1860B
Bevel angle
0°
45° (right)
46 mm x 92 mm
15 mm x 92 mm
(1-13/16" x 3-5/8")
(9/16" x 3-5/8")
46 mm x 65 mm
15 mm x 65 mm
(9/16" x 2-9/16")
Tabla de contenido
