Care And Cleaning - American Harvest Nesco BDM-100 Manual De Usuario

Warning! Do not attempt to start operating the bread maker, before it has either cooled
down or warmed up. If the display shows "H:HH" after the program has been started, it
means that the temperature inside of bread pan is too high. You should stop the program
and unplug the power plug immediately. Then open the lid and let the machine cool down
completely before using again. If the display shows "L:LL" after the program has been
started, it means that the temperature inside of bread pan is too low. You should place the
bread maker in a warmer environment.

Care and Cleaning

Pull the power plug out of the wall socket each time and allow the appliance to cool
down. Protect the appliance against splashing water and moisture, as these could lead to
an electrical shock hazard. Please also observe all safety instructions.
Important: The parts and accessories of the appliance should not be washed in a
dishwasher.
Housing, Lid, and Baking area: Remove all particles left behind inside the baking area
using a wet cloth or a slightly wet sponge. Wipe the casing and the lid with a wet cloth
or sponge. Make sure that the inside area is fully dry. For easy cleaning, the appliance lid
can be removed from the housing:
• Open the lid part way to align right post on lid with slot on housing extensions and lift
by tilting to the right and up to remove.
• To attach the lid, insert the left hinge extension first, then align right post with slot on
housing extension and push to insert.
Bread pan and kneading paddle: The surfaces of the bread pan and kneading paddle
have a non-stick coating. While cleaning, do not use any abrasive detergents, cleaning
powders or objects that may cause scratches on the surface. Due to moisture and vapor
the surface of various parts may undergo changes in their appearance over a period of
time. This does not affect the quality or functional performance of the appliance. Before
cleaning, take the bread pans and kneading paddles out of the baking area. Wipe the
outside of the bread pans with a damp cloth.
Never immerse the bread pan in water or other liquids. Clean the interior of the bread
pan with warm, soapy water. If the kneading paddle is incrusted and hard to release, fill
the bread pan with hot water for approx. 30 minutes. If the hole in the kneading paddle
is clogged, you can clean it carefully with a wooden skewer. Do not use any chemical or
abrasive cleaners to clean the appliance.
Care and Cleaning Instructions
6