Cleaning Your Tongue; Replacing The Brush Head - Silk’n SONICYOU DCA02 Manual De Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 70
gums. The bottom mode indicator light
EN
mode.
6. Within 5 seconds, press the operation button a second time.
The product is now in the "Clean" mode. It is suitable for daily
teeth cleaning.
The bottom and middle mode indicator lights illuminate in this
mode.
7. Within 5 seconds, press the operation button a third time.
The product is now in the "White" mode. It is suitable for
removing stains and whitening teeth.
All mode indicator lights illuminate in this mode.
8. Brush the upper and lower parts of your teeth as well as the
outer and inner sides of each quadrant for 30 seconds. Make
sure you do not apply too much pressure.
The product briefly pauses every 30 seconds as a reminder to
change your brushing area and automatically switches off after
2 minutes. You can also switch off the product anytime by
pressing the operation button once.
9. Clean the product after each use (see chapter "Cleaning").

6.2 Cleaning your tongue

1. The back of the brush head
area. Wet it and brush your tongue in a back and forth motion
for 30 seconds. Clean as far back as comfortable.
2. Rinse your mouth after cleaning.

7 Replacing the brush head

• Replace the brush head
• You can purchase new brush heads on our website at
Make sure the product is switched off when replacing the brush
head.
• To remove the brush head, gently pull it off from the product.
• To attach the brush head, align its bristles with the operation
button
product (see Fig. C).
Avoid applying too much pressure. There should be a small
gap between the brush head and the product.
13
start to wear or at least every 3 months.
www.silkn.eu.
and gently push the brush head onto the top of the
2
illuminates in this
3
/
contains a tongue cleaning
1
6
/
as soon as the bristles
1
6
Tabla de contenido
loading

Tabla de contenido