Tabla de contenido
Idiomas disponibles
Idiomas disponibles
To focus the video image:
If the system is in Standby mode, turn illumination on by pressing the
Illumination button
Hold the laparoscope tip approximately 5 cm (2 inches) from a suitable surface
to be imaged.
While viewing the image on the video monitor, press the focus buttons
on the camera (see Figure 19) to achieve a sharp and focused image.
Figure 19: Focus adjustment buttons
An animated focus adjustment icon
button is pressed (see Figure 20).
If the focus-stop icon
adjustment range, press the opposite focus button.
PINPOINT Endoscopic Fluorescence Imaging System Operator's Manual
on the PINPOINT camera.
displays onscreen when either focus
displays, the focus has reached the end of its
47
Tabla de contenido
