Royal Catering RC-C501 Manual De Instrucciones página 24

Place the unit on a heat resistant basis!
The device should always be used when positioned on an even, stable, clean,
fireproof and dry surface, and be out of the reach of children and persons with
limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must
be properly grounded and correspond to the technical details on the product label.
Only use the device in a horizontal position. Do not shake the device.
Disassemble the device and all its components and clean them before the first use.
3.3.
Device use
1. Ground the device housing, use the grounding terminal located on the
back of the griddle.
2. Connect the device to the power supply. The display will show "oFF".
3. Turn the device on with the On / Off button, the display will show the
currently measured temperature.
4. Enter your preferred grill settings via the control panel (on a two hob
grill: the left-hand panel is for the left-hand hub and the right-hand
panel is for the right-hand hub):
a) Timer settings:
- Press and hold the "Timer" button for approx. 2 seconds to enter the
time setting option. Then use the buttons (8) and (9) to set the
preferred value. To save the settings, press the "Timer" button or wait
about 10 seconds.
- Short presses of the "Timer" button will resume / stop the
countdown.
- The "Timer" LED is lit when the time is counting down. After the
countdown is complete, the LED flashes.
- After the countdown is complete, the device beeps.
NOTE: The countdown timer is for your information only. The device
will continue to operate after the countdown is complete.