Factory Reset; Energy Saving - Lenco DAR-060 Manual Del Usuario

SOFTWARE VERSION CHECK
You can check the unit software version.
1. Turn on the unit in DAB mode or FM mode.
2. Press the MENU button to access the menu control.
3. Press the PREVIOUS
show the software version number.
4. Press the MENU button to exit the menu control.

FACTORY RESET

This function resets the unit to the original factory settings.
1. Turn on the unit in DAB mode.
2. Press the MENU button to access the menu control.
3. Press the PREVIOUS
4. Press the PREVIOUS
unit.

ENERGY SAVING

Due to ErP stage 2 requirement and protect the environment, the unit will turn off to the standby mode automatically once
no music has been playing around 15 minutes except in AUX mode. When the AUX mode is used for more than 4 hours,
the unit will switch to standby mode. 10 minutes before entering standby mode you will be notified with "AUTO-OFF"
flashing on the display. To extend the AUX mode you can press CD PLAY/PAUSE.
When the unit is power off due to ErP, you can press the STANDBY button to turn on the unit again.
ACCESSORIES

Remote control x 1

Instruction manual x 1
or NEXT button until "SW version" is displayed and then press the ENTER button to
or NEXT button until "Factory Reset" is displayed and then press the ENTER button.
or NEXT button until "<Yes>" is displayed and then press the ENTER button to reset the
14