To Check The Battery Status; How To Use The Touch Screen (Optional) - Leotec E-INK Manual De Usuario

power is low. Charge the Reader in one of the following ways.
Connect to an AC outlet using the AC Adapter with 5V 1.5A or 5V 2A for the Reader.
It will take approximately 5 hours to fully charge the battery.
Connect to a computer via USB. The charging through USB takes significantly more time than
through an AC outlet.
To check the battery status
You can verify the remaining battery power by checking the battery indicator in the bottom left of
the screen. Charge the battery when remaining power is low (the fewer black segments indicated,
the lower the remaining power).
Notes
While you use the delivered charger and USB cable to charge the Reader, you can operate
the Reader.
While connected to your computer via USB, you cannot operate the Reader.
Do not leave the Reader connected to a notebook computer which is not connected to an AC
outlet for an extended period. It will consume the battery of the notebook computer.
Connection via an extension cable or USB hub is not guaranteed. Connect the USB cable
directly to the computer.
While the Reader is connected to your computer, do not turn on, restart, wake up from sleep
mode, or shut down the computer. These operations may cause the Reader to malfunction.
Disconnect the Reader from the computer before performing these operations.
How to Use the Touch Screen (optional)
Using the optional touch screen, you can perform various operations with a finger or with a
stylus.
Note
When you use a stylus, make sure to use the pointed end of it for tapping, dragging, or
drawing on the touch screen.
Tapping
By tapping on the touch screen, you can select an item on the menu or option list, etc.
Dragging
By dragging on the touch screen, you can turn a page or (de)select a text to highlight.
Dictionary (Optional)
When reading a book activate the built‐in dictionary by double clicking on a letter of a word
princely.
Hint
The touch screen is optional.
54 / 142