Idiomas disponibles
Idiomas disponibles
ENGLISH
PLEASE READ AND
SAVE THESE IMPORTANT
SAFEGUARDS
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock, and injury to
persons. These precautions include:
•
Read all instructions before using this appliance.
•
Use fan only for purposes described in the
instruction manual.
•
To protect against electrical shock do not
immerse unit, plug or cord in water or spray
with liquids. Plug the appliance directly into
electrical outlet.
•
Unplug from outlet when not in use, when moving
fan from one location to another, before putting
on or taking off parts and before cleaning.
•
Avoid contact with moving parts.
•
Do not operate in the presence of explosive
and/or flammable fumes.
•
To avoid fire hazard, NEVER place the cord
under rugs or any parts near an open flame,
cooking or other heating appliance.
•
Do not operate any appliance with a damaged
cord or plug after the appliance malfunctions,
or has been dropped/damaged in any manner.
Take it to an Authorized Service Center for its
examination and/or repair.
•
The use of attachments not recommended
or sold by the appliance manufacturer may
cause hazards.
•
Do not use outdoors. Do not let the cord hang
over the edge of a table, counter or come in
contact with hot surfaces or leave exposed to
high traffic areas.
BANF76G_BANF76L_BANF76P-LA_15ESM1.indd 3-4
•
To disconnect, grip plug and pull from wall
outlet. Never yank on cord.
•
Always use on a dry, level surface.
•
Do not operate fan until fully assembled with
all parts properly in place.
•
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by
a person responsible for their safety. Children
should be supervised to ensure that they do
not play with the appliance.
•
Close supervision is necessary when any
appliance is used by or near children, or
incapacitated individuals.
•
This appliance is not intended to be operated
by means of an external timer or separate
remote-control system.
•
This appliance is intended to be used in
household and similar applications such as: staff
kitchen areas in shops, offices and other working
environments; farm houses; by clients in hotels,
motels and other residential type environments,
and bed and breakfast environments.
ASSEMBLY
INSTRUCTIONS
(SEE FIGURE 1)
Your Table Fan comes completely assembled and
is ready for immediate use. Carefully unpack your
fan, read the instructions completely, plug it in and
enjoy!
Figure 1
A
A. Fan Head
B. Motor Housing
(not visible)
C. Tilt Adjustment
Knob
D
D. Fan Base
MOUNTING LOCATION GUIDE
MOUNTING LOCATION GUIDE
Use this diagram to help properly line up screws.
Use this diagram to help properly line up screws.
3
OPERATING
INSTRUCTIONS
1. Set fan on a dry, level surface.
2. Plug cord into any standard outlet. Please
make sure the speed control is in the OFF
position (o).
3. Selector (Speed) Control is located on the back of
the Fan Motor Housing. The speed is adjusted by
turning the control switch to the desired setting:
OFF - (o), HIGH - (II), LOW - (I).
ADJUSTMENT
INSTRUCTIONS
TILT ADJUSTMENT
Move or adjust the fan head to desired position.
WALL MOUNTING INSTRUCTION
1. Use the mounting location guide as a template
to outline the hole location.
2. Using ¼ inch drill bit, drill pilot hole through
the wall.
3. Insert included plastic anchors into the holes.
4. Screw in two included screws through the two
holes in the base.
5. Hang the fan onto the screws.
CLEANING/
MAINTENANCE
INSTRUCTIONS
B
Follow these instructions to correctly and safely
C
care for your fan. Please remember:
•
Always unplug the fan before cleaning or
disassembling.
•
Do not allow water to drip on or into the fan
motor housing.
•
Use a soft cloth moistened with a soap
solution to carefully clean the front and rear
grills.
•
Do not use any of the following as a cleaner:
gasoline, thinner, benzene.
FAN CLEANING
We recommend the periodic cleaning of your fan
by lightly running a vacuum cleaner nozzle over
the fan grill to remove any dust or dirt that may
have accumulated inside or on the unit.
NOTE: Please be cautious around the motor
housing area. Do not allow the motor or
electronics to be exposed to water. Do not attempt
to take off the grills of this fan or access the blade
in any way.
FAN STORAGE
INSTRUCTIONS
Your fan should be stored in the off-season in its
original box. It is important to keep it in a safe, dry
location.
•
We recommend using the original (or
appropriately sized) box.
•
Please remember to protect the fan from dust
or moisture.
4
7/9/15 09:21
