Technical Data - Healthcraft PLUS-TP Serie Instrucciones

OVERVIEW
Thank you for choosing the PLUS Toilet Roll Holder. Please read and
understand the instructions in this manual; keep manual for future
reference. It is your responsibility to see that your PLUS Toilet Roll Holder
is properly assembled, installed, and cared for. Failure to follow instructions
in this manual could result in serious injury or death. If you are not
equipped to undertake the outlined work, we would recommend that you
have your PLUS Toilet Roll Holder installed by a qualified contractor.
The PLUS Toilet Roll Holder is a combination grab bar and toilet roll holder,
designed to disguise safety in a bathroom accessory. The PLUS Toilet Roll
Holder is intended for moderate vertical and horizontal load bearing to
provide sitting and standing support for people with reduced mobility. The
PLUS Toilet Roll Holder is installed with appropriate fasteners to a
structural wall. The paper axle (which holds a roll of toilet paper) is NOT
intended to be a support product. The maximum user weight for this
product is 500lbs / 227kgs. Note: Product is not intended to support full
body weight. The PLUS Toilet Roll Holder is not to be used in any other
way than described above.
LIMITED LIFETIME WARRANTY
Products are covered by a limited lifetime warranty against defects in
materials and workmanship for the original purchaser. Warranty excludes
products that have been damaged through misuse, accidental damage,
alteration, normal wear and tear, wood material and stain, or the use of
corrosive or abrasive cleaning products.
Buyer hereby indemnifies, agrees to hold harmless and defend HealthCraft
Products Inc. from and against any and all liabilities, claims, (founded and
unfounded), losses, damages, costs and expenses (including without
limitation consequential damages and reasonable professional fees)
resulting from buyers specification, application, or improper use of goods
described hereon; buyers omission or neglect. HealthCraft Products Inc.
does not assume any liability for damage resulting from services performed
by others or faulty installation, misuse or misapplication of goods sold by
HealthCraft Products Inc. HealthCraft Products Inc. shall not be liable for
prospective profits or special, indirect, or consequential damages, or for the
cost of any corrective work done without HealthCraft Products Inc. prior
approval. HealthCraft Products Inc. total liability hereunder shall in no
event exceed the purchase price of the goods specified hereon.
Specifications subject to change without notice.
HealthCraft Products Inc.
2790 Fenton Road
Ottawa, Canada
K1T 3T7
6
English
Gate 88
Kanalgatan 45B
Skellefteå, Sweden
EC REP
93123
DELIVERY CONTENTS / WALL TOILET ROLL HOLDER FIGURE A.
1. Rail (Wall Toilet Roll Holder)
2. #10 x 1.75" Wood Screw, S/S (x6)
INSTALLATION WARNINGS
1. Rail must be installed to walls that are structurally sound.
2. If desired installation location does not have adequate structure, add
wood blocking.
3. CAUTION - Do not install if there is no structure behind drywall.
4. To reinforce hollow walls, we recommend Easy-Mount Anchors (each
sold separately). Weight capacity 300lbs.
5. CAUTION - Do not install if structure behind walls is unknown.
6. CAUTION - Do not install into metal studs.
SUGGESTED TOILET ROLL HOLDER LOCATIONS
Align the notch on the flange with the center of vertical studs. To
determine the optimal mounting location, we recomment holding the rail in
place and walking through the motions of a transfer (sitting, standing,
reaching, etc.). Recommended rail height 36-48" / 914-1219mm.
INSTALLATION
1. Hold the rail against the wall and adjust with level. Using the flanges as
a locating guide, mark the screw hole locations.
2. Drill pilot holes for fasteners.
3. Fasten the rail to the wall using appropriate fasteners and
waterproofing.
4. Slide flange cover over flange to conceal screws. Inspect hardware
regularly, and tighten if required.

TECHNICAL DATA

See Figure E.
PRODUCT USAGE
CAUTION - Rail is slippery when wet.
FIGURE B.
FIGURE C.
FIGURE D.
FIGURE F.