Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Rated voltage
Capacity
Weight
▶ Use only the Hilti battery chargers from the C4/36 series for these batteries.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com
5 Operation
Charging the battery
Note
Make sure that the outer surfaces of the battery are clean and dry before inserting the
battery in the approved battery charger.
Read the operating instructions for the charger for further information about the charging
process.
Inserting the battery
WARNING
Risk of injury Inadvertent starting of the rotary hammer.
▶ Before fitting the battery, check that the rotary hammer is switched off and that the
forward / reverse switch is in the middle position (i.e. safety lock engaged).
WARNING
Electrical hazard Risk of short circuiting.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts
in the rotary hammer are free from foreign objects.
WARNING
Risk of injury Hazard presented by a falling battery.
▶ A falling battery may present a risk of injury to yourself and others. Check that the
battery is securely seated in the rotary hammer.
Removing the battery
Fitting and adjusting the side handle
CAUTION
Risk of injury Loss of control over the rotary hammer.
▶ Check that the side handle is fitted correctly and tightened securely. Check that the
clamping band is engaged in the groove provided on the tool.
CAUTION
Risk of injury The depth gauge, if fitted but not used, may hinder the operator.
▶ Remove the depth gauge from the tool.
Fitting the chisel
WARNING
Risk of injury Hazard presented by a falling drill bit.
▶ Do not use drill bits with a C-type connection end in a drill adapter.
Note
The use of unsuitable grease may cause damage to the tool. Use only the
recommended grease supplied by Hilti.
Note
After fitting the tool, pull it in order to check that it is securely engaged and that the drill bit
turns concentrically in the chuck.
Removing the accessory tool
Fitting and adjusting the depth gauge
Forward / reverse
6
B 18/5.2 Li-Ion (01)
21.6 V
5.2 Ah
1.72 lb
(0.78 kg)
2
3
4
5
6
7
8
Tabla de contenido
