Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FEATURES
90 degrees fluid connector
Fits almost all vehicles
Fixing on master cylinder fill neck
Fill neck diameter: up to Ø 39 mm (1.5")
Regular working pressure: 1-2 bar (14.5-29 psi)
Brake fluid connector: type "air nipple"
Brake fluid connector thread: 1/4" NPT
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third-parties.
GENERAL SAFETY INFORMATIONS
Keep children and other unauthorised persons away from the work area.
•
•
Do not let any children play with the tool or its packaging
•
Do not use the tool if parts are missing or damaged.
Use the tool for the intended purpose only.
•
•
Keep working area clean and tidy, dry and free from unrelated materials.
Ensure the working area has adequate lighting.
•
Observe all safety advice and other notes of vehicle manufacturer.
•
•
These instructions serve as brief information and never replace the workshop manual. Please
always obtain technical specifications such as torque values and instructions on disassembly
and assembly from the vehicle-specific service literature.
SPECIFIC SAFETY INSTRUCTIONS
•
Make sure the cooling system is pressureless before opening.
•
Be careful when working on cooling systems, the cooling liquid can be very hot and cause
severe scalding if it comes into contact with the skin.
•
Always wear eye protection that meets OSHA and ANSI Z87.1 standards when using this
device.
Always wear gloves when working with the tool.
•
ENVIRONMENTAL PROTECTION
Recycle undesired materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in an
environmentally friendly manner. Check with your local waste disposal authority about
recycling measures. Dispose of this product in an environmentally friendly manner at the
end of its life.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Universal Brake Bleeder Adaptor
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 70995
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
