English - Forch 5326 125 1 Manual Del Usuario

E N G L I S H
FÖRCH - ANGLE GRINDER
5326 125 1
Congratulations!
You have chosen a Förch tool. Years of experience,
thorough product development and innovation
make Förch one of the most reliable partners for
professional power tool users.
Technical data
Voltage
(U.K. & Ireland only)
Power input
No-load speed
Wheel diameter
Spindle diameter
Weight
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
Defi nitions: Safety Guidelines
The defi nitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DA N G E R : I n d i c a t e s a n i m m i n e nt l y
hazardous situation which, if not avoided,
will result in death or serious injury.
WA R N I N G : I n d i c a t e s a p o t e n t i a l l y
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may result
in property damage.
Denotes risk of electric shock.
Denotes risk of risk of fi re.
50
All manuals and user guides at all-guides.com
5326 125 1
V 230
V -
W 1,400
-1
min 10,000
mm 125
M14
kg 2,5
EC-Declaration of conformity
5326 125 1
Förch declares that these power tools have
been designed in compliance with: 98/37/EC
(until 28.December 2009); 2006/42/EC (from
29.December 2009); 2004/108/EC; 2006/95/EC;
EN60745 -1; EN60745 -2-3; EN55014 -1:20 0 0
+A1:2001 +A2:2002; EN55014-2:1997 +A1:2001;
EN61000-3-2:2006; EN61000-3-3:1995 +A1:2001+
A2:2005.
For more information, please contact Förch at the
address below, or refer to the back of the manual.
L (sound pressure)
pA
K (sound pressure
PA
uncertainty)
L (acoustic power)
WA
K (acoustic power
WA
uncertainty)
Vibration total values (triax vector sum)
determined according to EN 60745:
Weighted RMS
acceleration value
Uncertainty K
The declared vibration emission value has been
measured in accordance with a standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used. This
could lead to a signifi cant underestimate of
exposure when the tool is used regularly in
such a way.
An estimation of the level of exposure to vibration
experienced during a given period of work should
also take into account the times when the tool is
switched off and when it is running idle in addition
to the trigger time.
5326 125 1
dB(A) 91
dB(A) 3
dB(A) 102
dB(A) 3
m/s 2 5,2
2
m/s 9,4