Function Settings; Residual Heat Indicator - Cooke & Lewis CLFLEX4Z60 Manual Del Usuario

Use
Pan dimensions
The hob will automatically detect the size of the pan and adapt accordingly. Please follow the minimum guidance below
and always place the pan in the centre of the cooking zone.
Cooking zone
1, 2, 3 or 4
1 and 2 combined or
3 and 4 combined
Function & settings
Protection from overheating
• When the built-in sensor detects an excessive temperature, the hob wil be stopped heating automatically.

Residual heat indicator

CAUTION: After use, each cooking zone will display "H" as a reminder that the glass is too hot to
touch. Though induction cooking does not generate heat, the magnetism used to heat the pans will
mean that this heat will still transfer to the glass surface by convection. This is perfectly normal for
Auto shutdown
• If you forget to switch off a cooking zone, the appliance will automatically shutdown after a certain time.
The default shutdown times are shown in the table below:
Power level
Keep warm
1-3
4-6
7-9
When the pan is removed, the induction hob will stop heating immediately and automatically switches off after 2 minutes.
WARNING: People with a heart pacemaker should consult with their doctor before using this unit.
Minimum (mm)
140
220
induction hobs.
Maximum time
8 hours
8 hours
4 hours
2 hours
Pan base dimensions
Maximum (mm)
220
220 x 400
23