Uline H-4118 Manual Del Usuario página 2

Figure 2
Figure 3
Figure 4
PAGE 2 OF 9
ASSEMBLY CONTINUED
2. Align mechanism with holes on bottom of seat
Front of Seat
3. Align armrest with holes on seat cushion and back
4. Slowly lower chair assembly onto the gas lift. Press
cushion with tension knob facing the front of seat.
Use four bolts to secure. (See Figure 2)
NOTE: Use Allen wrench to tighten all bolts.
cushion and use four bolts to secure loosely. Repeat
on opposite side. Once all eight bolts are installed,
fully tighten. Insert plastic caps in holes to cover
bolts. (See Figure 3)
down on seat cushion to secure. (See Figure 4)
0621 IH-4118