Assembling The Device - Royal Catering RC-BMG6650 Manual De Instrucciones

Ensure good ventilation in the room in which the device is being used. There should be
at least 15 cm distance between each side of the device and the wall or other objects.
The device should always be used when positioned on an even, stable, clean, fireproof
and dry surface, and be out of the reach of children and persons with limited mental
and sensory functions. The device should be placed in rooms with adequate ventilation
to prevent the spread of substances harmful to health.
Before the first use, the GN containers should be washed.

ASSEMBLING THE DEVICE

Before the first use, the feet must be attached to the device.
Before installing, please remove the plastic film from the device.
IMPORTANT! Installation, maintenance, conversion for the type of gas and
other specialist work should be performed by a qualified technician, a person
properly licensed or authorized by the manufacturer.
1. Before connecting the device, check that the supplied type of gas is compatible
with the type for which the device has been designed.
2. Before installing the device, install a shut-off valve so that you can shut off the
gas supply after work or in an emergency. The valve must be placed within easy
reach and close to the device!
3. This equipment is designed to be used with a low pressure control valve only.
4. The ½ BSPT connection is located on the rear of the device.
5. The pressure test point is located on the rear of the device.